Regviz

Texas Instruments /MSP432P401M /SYSCTL /SYS_SRAM_BANKRET

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as SYS_SRAM_BANKRET

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Texas Instruments/MSP432P401M/SYSCTL/SYS_SRAM_BANKRET#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (BNK0_RET)BNK0_RET 0 (BNK1_RET_0)BNK1_RET 0 (BNK2_RET_0)BNK2_RET 0 (BNK3_RET_0)BNK3_RET 0 (BNK4_RET_0)BNK4_RET 0 (BNK5_RET_0)BNK5_RET 0 (BNK6_RET_0)BNK6_RET 0 (BNK7_RET_0)BNK7_RET 0 (SRAM_RDY_0)SRAM_RDY

BNK3_RET=BNK3_RET_0, BNK7_RET=BNK7_RET_0, BNK6_RET=BNK6_RET_0, SRAM_RDY=SRAM_RDY_0, BNK1_RET=BNK1_RET_0, BNK4_RET=BNK4_RET_0, BNK2_RET=BNK2_RET_0, BNK5_RET=BNK5_RET_0

Description

SRAM Bank Retention Control Register

Fields

BNK0_RET

Bank0 retention
BNK1_RET

Bank1 retention

0 (BNK1_RET_0): Bank1 of the SRAM is not retained in LPM3 or LPM4

1 (BNK1_RET_1): Bank1 of the SRAM is retained in LPM3 and LPM4
BNK2_RET

Bank2 retention

0 (BNK2_RET_0): Bank2 of the SRAM is not retained in LPM3 or LPM4

1 (BNK2_RET_1): Bank2 of the SRAM is retained in LPM3 and LPM4
BNK3_RET

Bank3 retention

0 (BNK3_RET_0): Bank3 of the SRAM is not retained in LPM3 or LPM4

1 (BNK3_RET_1): Bank3 of the SRAM is retained in LPM3 and LPM4
BNK4_RET

Bank4 retention

0 (BNK4_RET_0): Bank4 of the SRAM is not retained in LPM3 or LPM4

1 (BNK4_RET_1): Bank4 of the SRAM is retained in LPM3 and LPM4
BNK5_RET

Bank5 retention

0 (BNK5_RET_0): Bank5 of the SRAM is not retained in LPM3 or LPM4

1 (BNK5_RET_1): Bank5 of the SRAM is retained in LPM3 and LPM4
BNK6_RET

Bank6 retention

0 (BNK6_RET_0): Bank6 of the SRAM is not retained in LPM3 or LPM4

1 (BNK6_RET_1): Bank6 of the SRAM is retained in LPM3 and LPM4
BNK7_RET

Bank7 retention

0 (BNK7_RET_0): Bank7 of the SRAM is not retained in LPM3 or LPM4

1 (BNK7_RET_1): Bank7 of the SRAM is retained in LPM3 and LPM4
SRAM_RDY

SRAM ready

0 (SRAM_RDY_0): SRAM banks are being set up for retention. Entry into LPM3, LPM4 should not be attempted until this bit is set to 1

1 (SRAM_RDY_1): SRAM is ready for accesses. All SRAM banks are enabled/disabled for retention according to values of bits 7:0 of this register

Links

()

Register License

Copyright © 2012-2018 Texas Instruments Incorporated - http://www.ti.com/

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of Texas Instruments Incorporated nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data